Dynacraft 8803-92 User Manual

Power Switch
Power Switch
Power Switch
Socket
HOW TO REPLACE THE POWER SWITCH
HOW TO REPLACE THE COAT
1 2
1. Gently turn the ride-on body on its side.
2. Use a screwdriver to remove the four screws from the left foot rest.
3. Carefully unplug the old power switch and plug in the new power switch for
replacement.
4. Replace the foot rest and re-tighten the screws to finish.
1. Gently turn the ride-on body upside down.
2. Open the zipper located on the underside of the body and remove the coat.
3. Replace with a new coat and close the zipper.
16
Zipper
Zipper
Zipper

Dynacraft 8803-92 Specifications

General

Brand	Dynacraft
Model	8803-92
Category	Toy
Language	English