Dynacraft 8803-92 User Manual

17
HOW TO REPLACE THE FOOT PEDAL
1. Turn off the power switch in the car on the side of left
foot rest. (see figure 1).
2. Use a flat head screwdriver to gently pry up the left
side of the foot pedal (see figure 2).
3. Remove the old foot pedal and disconnect it from the
pedal switch socket (see figure 3).
4. Connect the new foot pedal to the pedal switch socket
and ensure they are connected in the correct position
(see figure 4).
5. Insert the pedal into the pedal housing so that the
switch socket goes straight into the housing (see figure
5).
6. Tilt the foot pedal slightly to the right. Holding the pedal
with one hand, use a flat head screwdriver to press the
right side tab on the foot pedal. Push down until the
right tab snaps into place (see figure 6).
7. Press down on the left side of the foot pedal until it
clicks into place.
1
2
3
4
5
6
Pedal Switch
Socket
Power
Switch

Dynacraft 8803-92 Specifications

General

Brand	Dynacraft
Model	8803-92
Category	Toy
Language	English