16
WARNING The brake could be capable of skidding the tire and causing the
rider to loose control and fall or be thrown from the scooter if not applied correctly.
Practice using the brake in an unobstructed, open area to become familiar with its
function and until you can make smooth, controlled stops. Avoid skidding to stop as
this may cause you to lose control or damage the tire.
Chain, Chain Tensioner, Rear Brake and Rear
Tire Replacement
Tools required: Phillips screwdriver, 10mm wrench, 8mm wrench, and two (2)
15mm wrenches.
1. With a Phillips screwdriver, remove
the 4 bolts that secure the chain guard.
Then remove the chain guard.
2. Use a Philips Screwdriver and a
8mm wrench to loosen and disconnect
the brake housing anchor. (Note: Keep
the spacer and washers together).
To Next Page
Loading...
Need help?
General
