6
• Do not to allow hands, feet, hair, body parts, clothing, or similar articles to come
in contact with wheels or other moving parts.
• Before each cycle of operation, you must perform the pre-operation checks
specified in this manual or by the manufacturer, including:
– That the area that the unit is to be operated in is safe and suitable for safe
operation;
– That all safety labels are in place and understood by everyone, including the
riders;
– That tires/wheels are in good condition.
• Avoid sharp bumps, drainage grates, and sudden surface changes.
PRE-RIDE SAFETY CHECKLIST
• Check to make sure that all components are properly secured and are
functioning according to the manufacturer’s specifications.
• Components must be maintained and repaired and only with the manufacturer's
authorized replacement parts. Installation should be performed only by adult,
qualified personnel.
WARNING: FAILURE TO HEED THE WARNINGS LISTED ABOVE INCREASES RISK OF
POTENTIALLY SERIOUS INJURY. USE THE APPROPRIATE CAUTION WHEN RIDING AND ALWAYS
WEAR APPROPRIATE CLOTHING AND SHOES.
To Next Page
Loading...
