Dynamite PLATINUM Series User Manual

DYNP5526
DYNP5526
DYNP5522
DYNP5524
DYNP5519
DYNP5520
DYNP5517
DYNP5530
DYNP5531
DYNP5532
DYNP5533
DYNP5534
DYNP5535
DYNP5507
DYNP5536
DYNP5540
DYNP5380
DYNP5513
DYNP5515
DYNP5511
DYNP5528
DYNP5537
DYNP5547
DYNP5546
DYNP5545
DYNP5550
DYNP5548
DYNP5549
DYNP5553
DYNP5552
DYNP5550
DYNP5554
DYNP5551
DYNP5551
DYNP5539
DYNP5519
DYNP5521
DYNP5543
DYNP5541
DYNP5519
DYNP5519
DYNP5526
DYNP5542
DYNP5526
Spare Parts Listing
Stock # Description
DYNP5380 Front Bearing: DPS .18RE/.21XP
DYNP5507 Wrist Pin Clips (2): DPS .12/.18RE
DYNP5511 Rear Bearing: DPS .12/.18RE
DYNP5513 Collet: DPS .12/.18RE
DYNP5515 Carb Retainer Post: DPS .12/.18RE
DYNP5517 Cylinder Head Screw(4):
DPS .12/.18RE
DYNP5519 2 Needle Carb O-Ring Set:
DPS .12/.18RE
DYNP5520 High Speed Adj. Needle:
DPS .12/.18RE
DYNP5521 High Speed Needle Holder:
DPS .12/.18RE
DYNP5522 Low Speed Adj. Needle: DPS .12/.18RE
DYNP5524 Idle Screw: DPS .12/.18RE
DYNP5526 Throttle Lever/Boot/Spring/Nut:
DPS .12/.18RE
DYNP5530 Cylinder Head/ Blue: DPS .18RE
DYNP5531 Head Button: DPS .18RE
DYNP5532 Head Shim, .1mm (3): 18RE
DYNP5533 Head Shim, .2mm (3): 18RE
DYNP5534 Piston/Sleeve: 18RE
DYNP5535 Wrist Pin: 18RE
DYNP5536 Connecting Rod:18RE
DYNP5537 Crankshaft Pull Start: DPS 18RE
DYNP5539 Crankcase: DPS 18RE
DYNP5540 Carburetor: 18RE
DYNP5541 Carburetor Body: DPS 18RE
DYNP5542 Throttle Barrel: DPS 18RE
DYNP5543 Fuel Inlet Nipple: DPS 18RE
DYNP5544 Pull Starter Complete: DPS .18RE
DYNP5545 Pull Start Backplate: DPS .18RE
DYNP5546 Backplate O-ring (2): DPS .12/.18RE
DYNP5547 Pull Start One Way Bearing: DPS .18RE
DYNP5548 Pull Start Shaft: PDS .18RE
DYNP5549 Pull Start Cushion Spring: DPS .18RE
DYNP5550 Pull Start Screw Screw Set: DPS .18RE
DYNP5551 Pull Start Handle w/Extension:
DPS .18RE
DYNP5552 Pull Start Recoil Spring: DPS .18RE
DYNP5553 Pull Start Rope/Pully: DPS .18RE

Dynamite PLATINUM Series Specifications

General

Brand	Dynamite
Model	PLATINUM Series
Category	Engine
Language	English