D-Box + Star A3 Beta+ ASG 1XX + T-25 Instruction Manual
Code: DYN 62-2.05 Date: 20/12/2019 Revision: 05
4
Figure 2: Components of the system
As displayed in figure 3, the Star A3 Beta governor is connected to the T-25/T-25 UD steering mechanism via an
auxiliary part. This part, not supplied by Dynatech, must be designed so that the drive does not have clearance or
cause extra travel. Ideally, the part must directly go from the governor star to the steering mechanism’s handle as
displayed in Figure 3. The installer must check that the safety gears are correctly operated by the governor.
To Next Page
Loading...