Wall mount installation guide
(not included)
BEST
BETTER
GOOD
GOOD
HDMI video/audio
Component video and analog audio
Composite video and analog audio
(AV)
Coaxial video/audio
JACK TYPE CABLE CONNECTOR
CABLE
VIDEO QUALITY
Which cables do you have?
Your TV has several dierent jacks for connecting devices. For the
best video quality, use the best available connection.
Note: You can also connect a DVI device to your TV. See your online User Guide for
connection instructions.
Note: Images do not necessarily represent the exact design of your television.
Thank you
for purchasing this state-of-the-art
Dynex television. We hope you enjoy
the quality and reliability of this
television for years to come.
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Go to www.dynexproducts.com,
click Support & Service, enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click Search.
OVER
STOP!
Do not plug your
power cord in until all
other devices have
been connected.
Using an HDMI cable (BEST)
How do I connect my TV to an antenna or cable wall jack?
MAKING CONNECTIONS
How do I watch TV (cable or satellite box) and/or connect a device such as a
DVD or Blu-ray disc player, game station, or camcorder?
- OR -
Before using your new product, please read these instructions to prevent any damage.
D
M4 (16 mm) screws
M4 (12 mm) screws
Front
HDMI2
HDMI1
(DVI)
HDMI2
HDMI1
(DVI)
OPTICAL
L R
IN CVBS/Y PB PR
ANT/CABLE
IN
OPTICAL
L R
IN VIDEO/Y PB PR
QUICK
SETUP GUIDE
32" LED TV
DX-32D310NA15
Included accessories
A
AUDIO/VIDEO OUT
AUDIO/VIDEO
OUT
HDMI2
HDMI1
(DVI)
VGA
PC AUDIO IN USB
AUDIO OUT
Remote control
and two AAA batteries
Stand column
TV stand
M4 screws
(12 mm length) (4 pcs.)
M4 screws
(16 mm length) (4 pcs.)
Remote control sensor
Power indicator
Features
Front view
Back view
Multi-purpose jacks:
You can plug any
device that uses HDMI into either
HDMI jacks. However, certain devices
must be connected to the HDMI1
(DVI) jack. See the instructions that
came with your DVI device for more
information.
Note: The component and AV jacks
are shared. This means you can
connect only one component or AV
device at a time. We suggest
upgrading to HDMI if your device
supports it.
Using component cables (BETTER)
- OR -
Using an AV cable (GOOD)
Component cable option
AV cable option
OPTICAL
L IN R VIDEO/Y PB PR
ANT/CABLE
IN
OPTICAL
L R
IN VIDEO/Y PB PR
ANT/CABLE
IN
START HERE
How do I attach the stand to my TV?
(not for wall mounting)
You’ll need: Phillips screwdriver and a soft surface to lay the TV on.
A
Carefully place your TV face-down on a cushioned, clean surface.
B
Attach the stand column using the four provided M4 (16 mm)
screws. These are the longer screws.
C Find the front of the stand. Hook the slot in the
stand onto the tab on the stand column, then push the stand into place.
D Secure the TV stand with the four provided M4 (12 mm) screws.
These are the shorter screws.
B
C
Note: Connect the yellow video
cable to the green VIDEO/Y jack on
the back of your TV.
ANT/CABLE
IN
How do I prepare my TV for wall mounting
(not for use with a TV stand)
A Carefully place your TV face-down on a cushioned, clean surface.
B See instructions that came with the wallmount for more information
about to correctly mount your TV.
A
B
1 2 3
4 5 6
7 8
0
9
PICTURE
INPUT
MENU EXIT
CCD
FAV
HOME
ASPECT
VOL
ENTER
CH
INFO*
AUDIO MTS/SAP SLEEP
DX-RC5NA-15
To Next Page
Need help?
General
