17
TECHNICAL DATA
Note: Note:
Note: Note:
Note: Accuracy can be affected with choice of diaphragm and coating.
Other diaphragm and wear coating combinations exist, please consult factory for other configurations.
Certain models do are not available in some configurations.
3.3.
3.3.
3.
77
77
7
PP
PP
P
ROCESSROCESS
ROCESSROCESS
ROCESS
C C
C C
C
ONNECTIONSONNECTIONS
ONNECTIONSONNECTIONS
ONNECTIONS
22XXXX
XXXX
XXXX
XXXXXXXXXXXXXXXXXX
3.3.
3.3.
3.
77
77
7
.1.1
.1.1
.1
22412241
22412241
2241
90 = Standard Flange (K1)
91 = One Piece Flange (K2)
92 = One Piece Flange (K3)
93 = One Piece Flange (K4)
94 = One Piece Flange (K5)
95 = One Piece Flange (K6)
96 = One Piece Flange (K7)
Please see Figure 5-9 for dimensions for specific flanges. For other mounting flanges/process
connections not listed for the 2241 please consult factory.
3.3.
3.3.
3.
77
77
7
.2.2
.2.2
.2
22422242
22422242
2242
00 = 1/2-20 UNF
01 = 1/2 BSP Thread
02 = 1/2-20 with Loose Nut
03 = M10 X 1.5 Thread
04 = M14 x 1.5 Thread
05 = M18 x 1.5 Thread
06 = G1/4 Thread with Loose Nut
07 = G1/4 Thread with Taper Seat
08 = G3/8 Thread with Flat Seat
09 = G3/8 Thread with Loose Nut
10 = G3/8 Thread with Taper Seat
11 = 1/2-14 BSP with Flat seal
12 = 1/2-20 Jam Nut
13 = G1 Thread with Loose Nut
14 = M18 x 2.5 Thread Jam Nut
15 = M18 x 1.5 Thread JamNut
For other process connections of the 2242 please consult factory.
To Next Page
Loading...