10
Maintaining your robot’s
performance
Follow a few regular, simple maintenance steps.
To remove the pre-motor
filter:
Press the bin release
button and remove the
filter behind the bin.
To remove the post-
motor filter:
Press the button on the
filter cover and remove.
Pull the filter from the
robot.
Wash the filters with cold
water, repeat until the
water runs clear.
Tap to remove excess
water and leave to dry
for at least 24 hours.
Ensure that the filters are
completely dry before
refitting.
To refit the pre-motor
filter:
Push the filter back into
position and refit the
clear bin.
To refit the post-motor
filter:
Push the filter back into
position and refit the filter
cover.
Washing and drying the filters
Wash filters with cold water at least once every month.
25.03.2019 12:50 - C91380_256713-06-02_RB02-X276-EU-USER-GUIDE-TEXT_15_4c0s
To Next Page
Loading...
