11
Brush bar maintenance
Check your brush bar regularly.
Detach the brush bar using a coin
and remove any debris by hand.
Track maintenance
Check your tracks regularly.
Place the robot upside down on a soft
surface and remove any debris by hand.
Emptying the clear bin
Before every clean and when the dirt
reaches the MAX mark. Press the bin
release button. Place the whole bin in a
bag, lift the cyclone out of the clear bin
and empty the contents into the bag.
General cleaning
Check your infrared sensors,
lens and LED lights regularly.
Use a soft, dry, lint free cloth to wipe
all over the robot and especially the
infrared sensors, lens and LED lights.
25.03.2019 12:50 - C91380_256713-06-02_RB02-X276-EU-USER-GUIDE-TEXT_15_4c0s
To Next Page
Loading...
