7
3. If the appliance is used in a bathroom,
unplug after use. The proximity of water
presents a hazard even when the appliance
is switched off.
4. WARNING: Do not use this appliance near
bathtubs, showers, basins or other vessels
containing water.
5. If the supply cable is damaged, it must be
replaced or repaired by the manufacturer, its
service agent or similarly qualified persons in
order to avoid a hazard.
6. This appliance has a non-self-resetting
thermal cut-out safety device to prevent
overheating. If your appliance cuts out,
unplug it from the mains supply socket and
leave to cool.
7. CAUTION: In order to avoid a hazard due to
inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through
an external switching device, such as a timer,
or connected to a circuit that is regularly
switched on and off by the utility company, or
plugged into any socket where the electrical
supply is unstable or likely to be turned off.
8. For additional protection, the installation of a
residual current device (RCD) having a rated
residual operating current not exceeding
30mA is advisable. Ask your installer
for advice.
19.10.2018 14:13 - C99205-HS01_OPMAN_IN_X308-OPMAN_15_4c0s
To Next Page
Loading...
Need help?
General
