8
3. If the appliance is used in a bathroom,
unplug after use. The proximity of
water presents a hazard even when the
appliance is switched off.
4. WARNING: Do not use this appliance
near bathtubs, showers, basins or other
vessels containing water.
5. If the supply cord is damaged, it must be
replaced or repaired by the manufacturer,
its service agent or similarly qualified
persons in order to avoid a hazard.
6. This appliance has a non-self resetting
thermal cut-out safety device to prevent
overheating. If your appliance cuts out,
unplug it from the mains supply socket
and leave to cool.
7. CAUTION: In order to avoid a hazard
due to inadvertent resetting of the thermal
cut-out, this appliance must not be
supplied through an external switching
device, such as a timer, or connected to
a circuit that is regularly switched on and
off by the utility company, or plugged into
any socket where the electrical supply is
unstable or likely to be turned off.
8. For additional protection, the installation
of a residual current device (RCD) having
a rated residual operating current not
exceeding 30mA is advisable. Ask your
installer for advice.
05.07.2018 11:16 - C89203_HS01_OPMAN_FEAST_X308-OPERATING-MANUAL-89203.indd_15_4c0s
To Next Page
Loading...
