Dyson Airwrap - Page 3

Getting started
Power on/off
with cold shot
Sliding switch with
cold shot to set
your style.
LED
Clean the filter.
See the ‘Regular filter
maintenance’
section for details.
If the red LED lights,
and the filter has already
been cleaned, contact
the Dyson Helpline.
Removable filter cage
Easy to remove for cleaning
(see the ‘Regular filter
maintenance’ section
for details).
Airflow control
3 airflow speeds.
Temperature control
2 heat settings plus
a cold setting
to finish your style.
The LED lights are
loacated at the bottom
of the handle above the
filter cage
The filter cage is
located at the bottom
of the handle.
The temperature control
button is located on the
back, right hand side of
the handle.
The power button is
located in the middle of
the handle. It is a
slider button that pushes
upwards and downwards.
The airflow control
button is located
on the back, left
hand side of the
handle.