Dyson AM05 User Manual

21
Power and remote controlTilt function
Remote control docks magnetically
Attach remote control to top of heater
with the buttons facing down.
To operate, point remote control toward the front of the base.
Carefully hold the base and the top of the air loop amplifier.
Tilt forward or backward for the required airflow angle.
To change the airflow speed press the airflow speed
control button. The digital display will show the new
speed; after 3seconds it will change back to the
target temperature.
To start the heater oscillating, press the oscillation
control button. To stop the heater oscillating, press it
again. The heater will not oscillate when the control
buttons are pressed.
Stand by
on/off
Airflow speed
control
Oscillation
on/off
Thermostat
control
3. Airflow speed control 4. Oscillation control

Dyson AM05 Specifications

General

Type	Fan Heater
Technology	Air Multiplier
Oscillation	Yes
Remote Control	Yes
Heating Power	2000 W
Fan Speed Settings	10
Tilt	Yes
Timer	No
Safety Features	Overheat protection, Tip-over switch
Base Diameter	200 mm
Heating Method	PTC ceramic heating element