Using your tools
Open the cap on the handle and slide the wand upwards until both the wand
and hose release from the machine.
Push the tool into the end of the wand.
Remove from the wand
Open the cap on the handle and slide the wand upwards until both the wand
and hose release from the machine.
Press the button on the end of the hose to release the wand.
Fit the tool into the end of the hose.
Attach to the wand
Attach to the hose
Remove the tool from the end of the hose.
Push the wand into the end of the hose until it clicks into position.
Slide the wand down into the hose.
Close the wand end cap.
Remove the tool and slide the wand back into the hose. Position the wand
and hose in the recess on the handle of your machine.
Remove from the hose
To use the
combination tool,
press the button on
the tool and slide
the brush down the
crevice tool.
Use the tools attached
to the wand or hose
to clean stairs with the
machine placed at the
bottom of the stairs.
To Next Page
Loading...
