Dyson DC07 User Manual

Emptying the Clear bin
TM
Shroud cleaning
(when necessary)
To remove any build-up of lint or
large dust particles on the shroud:
A Press the bin release catch to
remove the clear bin
TM
.
B Clean the shroud with a cloth
or dry brush to remove the
lint and dust.
CAUTION
• Do not use the machine
without the clear bin
TM
in place.
tip Clear bin
TM
will not come off
cyclone unless the bin base
is open.
To reassemble the clear bin
TM
,
place on the floor with the clear
bin
TM
base closed.
C Holding the carry handle, put
the cyclone assembly inside the
clear bin
TM
,line up the front
and rear catches, and push
down to click the catches
into place.
D Ensure the clear bin
TM
is
secure before replacing on
the machine.
Clear bin
TM
cleaning
(optional)
IMPORTANT
• You may rinse the clear bin
TM
with water. Rinse only the
clear bin
TM
– do not rinse the
inner cyclone, shroud, or
cones.
• Do not use detergents.
• Do not immerse any other
part of the machine in water.
• Ensure the clear bin
TM
is
completely dry before
replacing.
A
B
C
D
13
www.dyson.com
18858_OPS_MANUAL_UPDATE_US.qxd 7/1/08 16:45 Page 13

Dyson DC07 Specifications

General

Type	Upright
Bagless	Yes
Cyclone Technology	Root Cyclone
Accessories	Combination tool, Stair tool
Bin Capacity	1.4 L
Filter Type	HEPA
Dust Capacity	1.4 L
Filter	Lifetime washable