service manual
Issued 10/06
38
Electrical wiring recap
Switch housing
Ensure the connection insulator is securely clipped
around the neutral terminals and fitted correctly
into the channel provided. The neutral wires must
be located securely into the retaining channels
provided before fitting the switches and remaining
wires.
Ensure that all wires are securely clipped to the
switches. All wires must be securely located into
the retaining clips provided.
Fitting notes
Micro switch loom
Ensure the micro switch is located onto the two
locating pegs on the micro switch housing.
Ensure the wires are neatly dressed within the
micro switch housing and that there is no
possibility of either being trapped when fitting the
micro switch cover.
To Next Page
Loading...
