Dyson Pure cool AM11 - Device Operations and Maintenance; Control Functions; Cleaning and Blockages

11
1 2 3
4 5 6
7
6 sec
click click
Control
Clearing blockages
Cleaning
To operate,
point the remote
control toward
the front of the base.
Standby ON/OFF
Attach the remote control
to the top of the appliance
with the buttons facing down.
Select a high flow of air.
Select a low flow of air.
Airflow
control
Standby
ON/OFF
Oscillation
ON/OFF
Sleep timer
To set the sleep timer, select the
desired time. When time reaches
zero, the appliance will go into
standby mode. To cancel, reduce
the time until two dashes appear.
When using the sleep timer,
the LED display will turn off
after 10 seconds of inactivity.
Look for blockages in the small
aperture inside the loop amplifier.
Use a soft brush to remove debris.
Look for blockages
in the air inlet holes.
Use a soft brush to
remove debris.
To clean, wipe with
a dry or damp cloth.
Do not use detergents
or polishes to clean
the appliance.
11