Dyson Supersonic HD02 - Regular Filter Maintenance; Weekly Filter Cleaning Guide

18
Maximum operating temperature in normal
working conditions: up to 105°C.
Diagnostics
The LEDs will flash indefinitely to communicate
one of the following warnings:
Settings
When solid, the LED lights indicate which settings
you’re using.
Flow
High
Temperature
Low/scalp mode
Medium
Constant cold/cold shot
No red LED
Fast
Medium
Gentle
If all three red lights remain
illuminated contact the Dyson
Helpline.
Clean the filter. See the
"Regular filter maintenance"
section for details.
LEDs
Maximum thermistor temperature at safety shut
down: 145°C.
DO NOT TURN BACK ON
14.11.2017 16:48 - C91854-HD02_OPMAN_FEAST_X332-PRO-OPMAN_15_4c0s