Dytran 3055D Series User Manual

Dynamic Transducers and Systems
21592 Marilla St. • Chatsworth, CA 91311 • Phone 818-700-7818
www.dytran.com • e-mail: info@dytran.com
1
OG3055D.docx
Rev A ECN 10060 06/21/13
Rev B ECN 11394 11/04/14
Rev C ECN 12135 07/27/15
OPERATING GUIDE
SERIES 3055D
IEPE ACCELEROMETERS, 10, 20, 50, 100, 200 & 500 mV/g
HERMETICALLY SEALED AND BASE ISOLATED
NOTE:
Series 3055D features hermetically sealed construction and
electrically isolated base for "off-ground" performance.
Hermeticity is obtained by all-welded construction and
glass-to-metal sealed connector. Case material is titanium.
Base ground isolation is by an electrically isolated threaded
insert located in the base of the instrument. Signal ground
return is electrically isolated from the mounting surface.
This guide contains:
1) Operating instructions, Series 3055D.
2) Outline/installation drawing, Series 3055D
3) Specifications, Series 3055D
NOTE: IEPE is an acronym for Integrated Electronics Piezoelectric types of low impedance voltage mode sensors with
built-in amplifiers operating from constant current sources over two wires. IEPE instruments are compatible with other
comparable systems labeled LIVM™

Dytran 3055D Series Specifications

General

Brand	Dytran
Model	3055D Series
Category	Measuring Instruments
Language	English

Summary

Product Overview and Operation

INTRODUCTION

Overview of Dytran Model Series 3055D accelerometers and their IEPE operation.

DESCRIPTION

Explains the electro-mechanical schematic and system operation.

Installation and Setup

INSTALLATION

Step-by-step guide for mounting the accelerometer, including surface prep and torque specs.

Connecting the cable

Instructions on connecting the cable to the accelerometer and power unit.

Technical Details and Maintenance

HIGH FREQUENCY RESPONSE

Explains the frequency response characteristics and limits of the 3055D series.

CAUTIONS

Provides warnings regarding temperature, cable vibration, and physical shock.

MAINTENANCE AND REPAIR

Outlines maintenance procedures, troubleshooting, and return process.