11
2.3 Left Switch Unit
2.3.1 High Beam Switch
Position 1:
When the low beam is switched on, pressing the switch down
activates the high beam as long as pressure is applied
• The blue high beam LED is displayed on the
speedometer while pressure is applied
Position 2:
When the low beam is switched on, pressing the switch up
switches the high beam on permanently
• The blue high beam LED is displayed in the
speedometer
2.3.2 Indicator switch
Setting indicator: Sliding the switch to the left or right
switches on the indicators
• Audible signal
Turn off indicator: briefly press white button
To Next Page
Loading...
