4 - The PatchMix DSP Mixer
The Session
34 Creative Professional
• Inputs +4 or -10 Selects between Consumer level (-10dBV) or
Professional level (+4dBu) inputs.
(Use the -10dBV setting if your input is too weak.)
• Outputs +4 or -10 Selects between Consumer level (-10dBV) or
Professional level (+4dBu) outputs.
(The +4 dBu setting outputs a hotter level.)
• PCI Card Optical Input Selects between ADAT or optical S/PDIF for the 1010
PCI card ADAT Input. The coaxial S/PDIF input is
disabled when S/PDIF optical is selected.
• PCI Card Optical Output Selects between ADAT or optical S/PDIF for the 1010
PCI card ADAT Output. The coaxial S/PDIF Output is
disabled when S/PDIF optical is selected.
• S/PDIF Optical Format Selects between S/PDIF or AES/EBU format for S/PDIF.
This sets the S/PDIF-AES status bit, but does not affect
the signal level.
To Next Page
Loading...
