2 - E-MU Digital Audio System
2 - Hardware Installation
The E-MU 02 CardBus Card
The E-MU 02 CardBus card is the heart of the system and contains E-MU’s powerful E-DSP chip. The powerful hardware DSP
on this little card leaves more CPU power free on your computer for additional software plug-ins and other tasks.
CardBus Connector
Connects the E-MU 02 CardBus card to your
computer.
Removing the CardBus Card
Before removing the CardBus card, you need to
select “Safely Remove Hardware” from the
Taskbar. Otherwise ASIO channels will remain
allocated to the Digital Audio System and your
other audio applications may develop problems
or hang.
1. From the Taskbar, select the icon.
The “Safely Remove Hardware” pop-up
window appears.
2. Choose OK, then press the Eject button on
the CardBus slot to eject the card.
Monitor Output
This output is designed to drive stereo
headphones or any line-level input. Adjust the monitor output level in the PatchMix DSP application to control the volume
of this output.
EDI Connector
Connect to MicroDock
Monitor Output
Line Level or Headphones
CardBus Connector
Connect to Computer
E-MU 02 CardBus Card
Mana GS.fm Page 2 Thursday, March 10, 2005 2:59 PM
To Next Page
Loading...
