Tutorials
Cakewalk Sonar LE
E-MU 0404 PCI Digital Audio System 21
2 - Basic Multitrack Recording
In this tutorial, we’ll assume you’re using a single input or pair of inputs. For more
advanced recording, refer to the Sonar LE manual.
Select the Sonar LE Recording Template
1. Choose (0404) Sonar LE from the Start -> Programs menu. The path is: (Program
Files\Creative Professional\E-MU PatchMix DSP/VST\Recording Templates). Sonar
LE will launch and load the Project.
2. The Sonar LE Project window shown below appears. Five empty tracks are ready to
record. Each track is already connected to an input or pair of inputs in PatchMix.
3. Click the Zoom In Vertical button repeatedly to enlarge the tracks as in the
Project Window below.
4. Select the Track which matches the input you want to use on the Digital Audio
System by clicking on it. Note that the selected track heading brightens as you select
it. In the example below, we are using Track 1, fed from I/O Card L.
5. Change the input setting if you want to use the line inputs to record in mono. Click
on the little triangle on the right side of the track Input box to see the list of all
the PatchMix DSP inputs.
The Sonar Project Window
(Master is routed to ASIO 31/32)
Track Input Meters
Input
Output
Track Record Enable
Click the Vertical Zoom to Enlarge the Tracks
To Next Page
Loading...
