Emax II operation manual
93
DIGITAL PROCESSING 6 SPLICE
Splicing marks an End point in one sample and a Start point in a second sample,
then crossfades the end of the first sample and the start of the second sample over
an adjustable length of time. Portion of the samples not used in the spliced version
are discarded, and any loops are ignored.
You will not hear the effects of splicing until the Enter button is pressed.
Always
make sure you have a backup of anything that you splice in case the splice does
not turn out well.
Applications: Splice an unusual attack to one sample, or unusual decay on to another.
1. Activate DIGITAL PROCESSING 6. This voice provides the first part of the spliced
sound.
2. The display now says:
Splice From P XX
Select A Preset
...where XX is a preset number. Since there are two samples used in splicing, first the
preset containing the second sample must be identified. Select the preset, then press
ENTER.
DIGITAL PROCESSING
Splice
End Of
1st Voice
Start of
2nd Voice
New Voice
Voice 1
(Percussive)
Voice 2
(Bowed)
Splice Point
To Next Page
Loading...