E-Mu EMAX II - Loading and Saving Presets

Emax II operation manual
96
...where XX is a preset number. Since there are two samples used in combining, first the
preset containing the second sample must be identified. Select the preset, then press
ENTER.
3. The display says:
Select Voice
Play A Key
Play a note within the range of the desired voice, then press ENTER. The sample used
by this voice will be combined with the sample used by the first voice.
4. The display now asks:
Combine Changes
Data OK?
If you’re having second thoughts, press NO. Otherwise, press YES to permanently
combine the two samples.
5. The display will say “Combining” for as long as it takes to combine the two samples.
Depending on the sample length, this can be a very long process...if you need to catch
up on your reading, now is a good time. Or, you can send out for pizza.
DIGITAL PROCESSING 8 CROSSFADE LOOP
This virtually eliminates a loop’s splicing glitch by crossfading the end and
beginning of the loop.
1. Activate DIGITAL PROCESSING 8.
The display will say:
Crossfade Loop:
Changes Data!OK?
DIGITAL PROCESSING
Crossfade Loop