Emax II operation manual
97
DIGITAL PROCESSING
Crossfade Loop
If you don’t mind changing the data, press YES. Otherwise, press NO to return to the
module identifier.
2. The display now asks:
Linear or EqPwr?
Linear
...where Linear is the default value. Use the data slider to select between Linear (a
straight mathematical crossfade) and Equal Power (a weighted crossfade that produces
no apparent level shift). After making your choice, press ENTER.
3. After taking a few seconds, the Emax II will ask “Truncate after Loop? Y/N. After you
have made your choice, the Emax II will return to the module identifier.
0
100
50
-50
-100
0m 1m 2m 3m 4m 5m 6m 7m 8m 9m 10m
Loop EndLoop Start
100
50
0
-50
-100
0m 1m 2m 3m 4m 5m 6m 7m 8m 9m 10m
EFFECT OF CROSSFADE LOOPING
Sine Wave and Silence
Forward Loop
After Crossfade Looping
Crossfade Looping takes data from around the Start Point and fades it into the data from the
End Point so that the data at both loop points is identical.
To Next Page
Loading...