Emax II operation manual
98
Hints: Before doing a crossfade, copy the voice whose loop is to be crossfaded to another
preset. Since crossfading permanently alters the voice, keeping a copy lets you retrieve
the original voice and try again.
Linear mode is useful for well-correlated data, such as a sample which has already been
autolooped. Otherwise, use equal power. If distortion occurs, try reducing the sample’s
level (see DIGITAL PROCESSING 9) then crossfading it.
DIGITAL PROCESSING 9 DIGITAL EFFECTS
Activate DIGITAL PROCESSING 9. The display will say:
Digital Effects
(1-6) / Slider
Use the data slider or increment buttons to catalog the various options.
1 Gain/Atten
2 Reverse Sound
3 Change SmpRate
4 Change Pitch
5 Transform Mult
6 Spectrum Synth
■
1 Gain/Atten
Alters the level of a voice.
1. Select with the slider and press ENTER, or key in 1 from the keypad.
The display shows:
±XX dB
Gain
...where XX is a two-digit number.
DIGITAL PROCESSING
Gain/Attenuate
■
The default amount of
gain change shown in
the display is the
amount of gain needed
to normalize the sample
(bring the sample to full
level).
To Next Page
Loading...