Emax II operation manual
101
Modifies Sample&
Takes XX min.OK?
... XX being the time it takes Emax II to do the calculations for the pitch change.
3. Press YES to change the pitch, NO to return to the module identifier.
Pitch Change requires memory space to perform its calculations. In some cases there
may not be enough memory left to convert the sound, in which case the display warns
you.
■
5 Transform Multiplication - A New Way to Combine Sounds.
Transform Multiplication is a digital effect that can be used to create some of the
wildest new sounds that you have ever heard. Basically, two sounds are merged
together in a way that frequencies common to both sounds are accentuated while
uncommon frequencies are discarded. Transform Multiplication works best using
harmonically rich sounds. The length of the resulting sound will be equal to the
length of the current voice.
1. After selecting the current voice, select DIGITAL EFFECTS 5 and the display will say:
TranMultWith P01
Select a Preset
2. Use the slider to select the preset containing the second voice, press ENTER and the
display will say:
Key: XX 39kHz
Select a Voice
3. Play a key to select a voice, then press ENTER.
If you do not have enough sample memory in your Emax II to complete the calulations,
the display will inform you that there is “Not Enough Sample Memory!” and you will
be returned to the module identifier.
DIGITAL PROCESSING
Transform Multiplication
Sound Designers: TM
is a valuable tool in your
arsenal which can be
used to produce weird,
mood-creating sounds
that have never been
heard before.
To Next Page
Loading...