E-Mu EMAX II - Spectrum Synthesizer

Emax II operation manual
103
■ 6 Spectrum Synth
This is a full function additive synthesizer with dynamically changing spectrums
and envelopes. Virtually any imaginable waveform may be created. After a sound
has been created it may be spliced, combined, and processed in the same manner
as a sound that has been sampled into Emax II.
1. Select DIGITAL EFFECTS 6 and the display will say:
Synth Changes
Data! OK?
2. If it’s OK to write over the current voice, press YES. If not press NO to return to the
module identifier. If you pressed YES, the display will now say:
Synth Options
[0-9] / Slider
3. Use the slider to catalog the various options.
1 Freq. Spectrum
2 Time Slice
3 Ampl. Contour
4 Pitch Contour
5 Pitch/Ratios
6 Crossfade
7 Load Backup
8 Save Backup
9 Erase
0 Synthesize!
For complete instructions on how to use the Spectrum Synthesizer, see the Advanced
Applications section of this manual.
DIGITAL PROCESSING
Spectrum Synthesis