E-Mu EMAX II - Erasing Voices and Stereo Voice Configuration

Emax II operation manual
109
PRESET MANAGEMENT 3 CREATE PRESET
Creating a preset provides a home for all those great samples you have.
1. Activate PRESET MANAGEMENT 3. The display says:
Create Preset XX
Select A Preset
...where XX defaults to the first empty preset. Select the desired preset number (use the
slider, or numeric keypad) and press ENTER. Note: If you select a preset which already
exists, the display will ask if you want to overwrite (that means erase, so think twice!)
the existing preset. Press YES to overwrite, NO to return to the module identifier.
2. The display will now give you the chance to rename the preset. Name the preset as
described in PRESET MANAGEMENT 6 and then press ENTER to return to the module
identifier.
PRESET MANAGEMENT 4 ERASE PRESET
Here’s how to erase an unneeded preset.
1. Activate PRESET MANAGEMENT 4. The display says:
Erase Preset XX
Select A Preset
...where XX is the preset to be erased (this defaults to the current preset). Select the preset
to be erased then press ENTER.
2. The display will ask...
Erase Preset XX
Are you Sure?Y/N
To erase preset XX, press YES, or press NO to return to the module identifier.
PRESET MANAGEMENT
Create Preset