Emax II operation manual
110
PRESET MANAGEMENT 5 COPY PRESET
Use this function to copy one preset into another preset.
1. Activate PRESET MANAGEMENT 5. The display says:
Copy PXX
Select A Preset
...where XX is the preset to be copied (the source preset; this defaults to the current
preset). Select the preset to be copied (use the data slider or numeric keypad) then press
ENTER.
2. The display will ask...
Copy PXX to PYY
Select A Preset
...where XX is the number of the source preset and YY the number of the destination
preset (this defaults to the first empty preset). Select the desired destination preset (use
the slider or numeric keypad) and press ENTER. If the preset is not empty, a message
will appear asking if you want to overwrite the existing preset.
2. The display will now give you the chance to rename the preset so that the destination
preset has a different name from the the source preset. Name the preset as described in
PRESET MANAGEMENT 6 and then press ENTER to return to the module identifier.
PRESET MANAGEMENT 6 RENAME PRESET
Use this function to rename an existing preset.
1. Activate PRESET MANAGEMENT 6. The display says:
Rename Preset XX
Select A Preset
...where XX (which defaults to current preset) is the preset to be renamed. Select the
PRESET MANAGEMENT
Copy Preset
To Next Page
Loading...