Emax II operation manual
111
preset to be renamed (use the slider or numeric keypad) then press ENTER.
2. Use the cursor buttons to select the character to be changed. Select the character itself
with either the data slider (moving the slider all the way to the bottom of its travel
produces a space), or the keyboard keys. You can also use the numeric keypad to enter
any numbers that are part of the name. When the naming process is complete, press
ENTER to return to the module identifier.
PRESET MANAGEMENT 7 PRESET SIZE
Memory space is precious, so you’ll want to use this function to find out how much
sample memory and preset memory each preset takes up.
1. Activate PRESET MANAGEMENT 7. The display says:
Preset Size PXX
Use Data Slider
...where XX defaults to the current preset. Select the preset whose size you want to check
and then press ENTER.
2. The display now says...
PresMem SampMem
XXXXXX YYYYYYY
...where XXXXXX is the preset memory in bytes and YYYYYYY is the sample memory in
16-bit sample words. After checking the memory, press ENTER to return to the module
identifier.
Note: Erasing a preset won’t necessarily reduce the amount of sample memory if these
samples are used in other presets that are not erased.
Also, note that sequences and samples share the same memory space. Therefore,
eliminating unneeded samples will allow more memory for sequences and visa
versa.
PRESET MANAGEMENT
Preset Size
To Next Page
Loading...