E-Mu EMAX II - Copy Voice; Copy Voice(S)

Emax II operation manual
115
PRESET DEFINITION
PRESET DEFINITION 1 COPY VOICE(S)
This function copies voice(s) from one preset to another.
Application: Copying a voice back to a subset of its former range gives you another voice
that uses the same sample. Using this technique, you can dynamically process each voice
separately.
Copy Voice
1. Activate PRESET DEFINITION 1.
2. The display says:
GetVoiceFrom PXX
Select A Preset
... where XX defaults to the current preset.
Select the preset that contains the voice(s) to be copied, then press ENTER.
3. The display now shows:
Copy Pri,Sec,or
Both Voices:XXX
... where XXX is either Pri, Sec or Both.
Copying a voice back to a subset of its former range gives you another voice, using
the same sample, which may be separately processed.
■ Use the Copy Voice
function to create mul-
tiple voices from one
sample. This can be be
used to create alter-
nate tunings, or differ-
ent pan settings for
each key.
COPY
Voice #1
Voice #2
Voice #1