E-Mu EMAX II - Page 130

Emax II operation manual
119
PRESET DEFINITION
3. The display now shows the complete assignment:
Orig Lo Hi Out
XX XX XX Y
...where XX are notes and Y is one of the 4 stereo output channels.
Place the new original note. If the display says “Illegal Asgnment,” you are doing
something like placing the lower note above the original. Play a key to select notes, and
the cursor buttons to select the desired parameter to be changed. Note: You can also use
the data slider to show the available keys.
To select the output channels (Out) over which the voice will appear, move the cursor
under Out and select the desired output - Main, or one of the A, B, C submix outs. Press
ENTER, and the Emax II will return to the module identifier.
A voice may be assigned to any stereo output pair.
Edit Assignment
Main
Sub A
Sub B
Pri/Sec
Voices 01
Pri/Sec
Voices 22
MIX
OUTPUT
Pri Voice
32
Sec Voice
20
L
R
L
R
L
R
Pri Voice
12
Sec Voice
99
Sub C
L
R
Pri/Sec
Voices 05
Pri/Sec
Voices 50