E-Mu EMAX II - Crossfade

Emax II operation manual
123
PRESET DEFINITION
Crossfade/Cross-switch
POSITIONAL CROSSFADE
Primary
Voice
Secondary
Voice
Overlap
Range
When playing from left to right across the shaded range, the primary voice fades out as the
secondary voice fades in.
PRESET DEFINITION 5 VELOCITY XFADE/SWITCH,
POSITIONAL XFADE
Velocity Crossfade crossfades between the primary and secondary voices ac-
cording to how hard you play the keyboard. One voice will become louder as you
play harder and softer as you play softer, while the other voice will become louder
as you play softer and softer as you play harder . Velocity switch is similar,
however, there is a threshold above which one voice plays and below which the
other voice plays.
Primary
Voice
Secondary
Voice
Overlap
Range
When playing in the shaded range, if the secondary voice equals "Hard", then the primary
voice becomes progressively softer and the secondary voice becomes progressively louder as
you strike a key with increasing force.
VELOCITY CROSSFADE
Where two voice’s keyboard assignments overlap, Positional Crossfade alters the
level balance (mix) between the two voices depending on where you play within
the overlap range.