Emax II operation manual
126
PRESET DEFINITION 6 ARPEGGIATOR
SETUP
You’re going to love this arpeggiator: It does a lot and it’s easy to set up. Best of
all, arpeggiation settings are stored with the preset so that different presets can
have totally different arpeggiation characteristics. Also, arpeggiation can be
assigned to any range of the keyboard or the entire keyboard, and some arpeggia-
tion parameters can be altered in real time for expressive arpeggiation.
1. Select the current preset; this preset will contain the arpeggiation information.
2. Activate PRESET DEFINITION 6. The display says:
Arpeg Setup Menu
Use Cursor Keys
Use the cursor keys to select the various Arpeggiator options or press ENTER to jump
back to the module identifier.
The first arpeggiation option display says:
Arpeggiator: off
Select on/off
Select the desired arpeggiator status with the ON or OFF buttons. To jump back to the
module identifier press ENTER, otherwise press the right arrow cursor key to continue
the setup.
3. The next display says:
Tempo: =120.00
[040-240]Inc/Dec
Use the data slider or the numeric keypad to adjust the tempo through the range from
40-240 Beats Per Minute. Press the right cursor key to to do fine adjustment to the tempo.
Use the data slider or the numeric keypad to adjust the tempo through the range from
.00-.99 Beats Per Minute.
If you have selected a clock other than the internal clock, (see next menu item), the
arpeggiator will follow and display this clock rather than the internal clock.
PRESET DEFINITION
Arpeggiator
To Next Page
Loading...