Emax II operation manual
127
4. The next menu item chooses the note value; the display says:
Note Value: 1/16
Use Data Slider
Use the data slider to select between the following arpeggiation note values: 1/2 note,
1/4 note, 1/4 triplet, 1/8, 1/8 triplet, 1/16 (default setting), 1/16 triplet, 1/32, 1/32
triplet, and (believe it or not) 1/96 note. The note value can be manipulated in real time.
To jump back to the module identifier press ENTER, otherwise press the right arrow
cursor button to continue the setup.
5. The next display is:
Mode: fwd assign
Use Data Slider
Use the data slider to catalog the various modes.
● UP held notes arpeggiate continuously from lowest to highest pitch.
● DOWN held notes arpeggiate continuously from highest to lowest pitch.
● UP/DOWN held notes first arpeggiate from lowest to highest pitch, then
from highest to lowest, then repeat this cycle.
● FWD ASSIGN held notes arpeggiate continuously in the order in which the keys
were pressed.
● BKWD ASSIGN held notes arpeggiate continuously in the reverse order in which
the keys were pressed.
● RANDOM held notes arpeggiate continuously in a random fashion.
To jump back to the module identifier press ENTER, otherwise press the right arrow
cursor key to continue the setup.
6. The next display says:
Latch: off
Use Data Slider
PRESET DEFINITION
Arpeggiator
To Next Page
Loading...