Emax II operation manual
153
Note: If the filter and VCA release are both at 32 (also see DYNAMIC PROCESSING 14),
a key will sustain at the sustain level even after you take your fingers off the keys. This
is like the HOLD function found on standard synthesizers. The sound will continue to
sustain unless you play more notes than there are available channels, in which case
previously assigned channels will be assigned to newly played notes.
If a key is released during the Hold (H) phase, the Release (R) phase begins.
level
key
down
key
released
AHR
time
DYNAMIC PROCESSING
VCA Envelope
To Next Page
Loading...