Emax II operation manual
164
DYNAMIC PROCESSING 22 CONTROL ENABLE
This unique function allows you to exempt specific voices from certain real-time
control functions.
Application: Exempt bass notes with long release times from pitch bending by disabling
pitch bend for the bass voices. You may then bend pitch in the upper range without
affecting the bass notes.
1. Activate DYNAMIC PROCESSING 22. The display will say.....
Control Enable
Use Cursor Keys
2. Press the right cursor key. The cursor keys scan through the various real time control
destinations (see PRESET DEFINITION 9) in the following order: Pitch, LFO to Pitch,
LFO to Filter, LFO to VCA, Filter cutoff frequency, Level, Attack, and Pan.
3. The default setting for all destinations is ON. To exempt the current voice from a
particular control destination, press OFF. Example: To exempt the current voice from
being pitch-bent, press OFF when the display shows Pitch.
4. After disabling the unwanted control destinations, press ENTER to return to the
module identifier.
DYNAMIC PROCESSING
Control Enable
Main
Sub A
Sub B
MIX
OUTPUT
L
R
L
R
L
R
Sub C
L
R
= Primary Voice
= Secondary Voice
Groups of voices can be assigned to specific output channels using Dynamic Processing 21.
To Next Page
Loading...