Emax II operation manual
173
Press ENTER if you don’t want to rename; this returns you to the module identifier.
Otherwise, name the sequence as described in SEQUENCER MANAGE 6.
SEQUENCER MANAGE 6 RENAME SEQUENCE
This function lets you rename a sequence in the Emax II memory.
1. With the Sequencer Manage module active, select 6.
2. The display says:
Rename SXX
Select Sequence
...where XX is a two-digit sequence number. Use the slider, increment buttons, or
numeric keypad to select the sequences in memory available for naming.
3. After selecting the sequence to be renamed, press ENTER. The display says:
Rename Sequence
SXX (seq. name)
Use the cursor buttons to select the character to be changed. Select the character itself
with either the data slider (moving the slider all the way to the bottom of its travel
produces a space),the increment buttons,or the keyboard keys. You can also use the
numeric keypad to enter any numbers that are part of the name.
4. Press ENTER after naming the sequence; Emax II returns to the module identifier.
SEQUENCER MANAGE
Rename Sequence
To Next Page
Loading...