Emax II operation manual
179
SEQUENCER SETUP
Supermode
play the sequence to make sure all is well. If it is, call up SEQUENCER SETUP 6, turn
off SuperMode, press ENTER, and Emax II will return to the module identifier.
IN BRIEF:
To access multiple presets thru MIDI
1) Turn SuperMode on (Setup 6)
2) Select SuperMode Map
3) Enter Track Preset (Setup 2)
4) Since track numbers = MIDI channel numbers, assign proper presets to
desired tracks
To download sequences into Emax II via MIDI:
1) Copy SuperMode Map with proper track/preset assignments to another
sequence location (Manage 5)
2) Turn Auto Extend on (Setup 3)
3) Turn MIDI Start/Stop on for the current preset (Preset Def. 7)
4) Choose MIDI clock (Manage 2)
5) Hit “Play” on source sequencer
MIDI IN
MIDI Seq. Track Emax II Preset
Preset 05
Preset 09
Preset 22
Preset 50
Ch. 1
Ch. 2
Ch. 3
Ch. 16
1
2
3
16
MIDI Channels are always routed to the same numbered Track.
The Supermode Map directs a Track to the appropriate Preset.
To Next Page
Loading...