Emax II operation manual
207
A spectrum may be placed at any of the 24 “time slice” locations. Placing a spectrum at
a given time slice will determine the timbre of the sound at that point in time.
ABOUT TIME SLICES
Once you have determined the length of the sound that you wish to synthesize, Emax
II automatically divides the sound into twenty-four equal sections. Each section is called
a time slice. A time slice contains the spectrum at a given point in the sound. A Time Slice
is simply a Spectrum which has been placed at a Time Slice location. You can create a time slice
and save it as a spectrum, or place a previously created spectrum at a time slice.
SPECTRUM SYNTHESIS
Timeslices
100%
0%
100%
55%
20%
8%
0%
123456789101112131415161718192021222324
Partials
Spectrums
Adding these partials together in these
ratios, produces this waveform.
Spectrum =
123456789101112131415161718192021222224
Length of Sound
Timeslice
Time Slices
etc.
Each spectrum plays for 1 timeslice
period (1/24th of a sound) or can be
crossfaded between timeslices.
Spectrums can be placed at any
timeslice location.
To Next Page
Loading...