Emax II operation manual
211
COPY
a Spectrum
(Use for creating a duplicate spectrum which can then be modified)
A. Press #1 on the keypad to access the Frequency Spectrum menu options.
B. Use the slider to select the number of the spectrum you wish to copy. Press ENTER.
C. Press NO two times to get to the spectrum COPY screen.
D. Press YES to copy. The display reads “Copy SP01 to SP01...”.
E. Use the slider to select the number of the spectrum that you wish to copy to.
F. Press ENTER, then NO to return to the Synth Options menu, or YES to make another
copy.
SPECTRUM -> TS
(Use for placing a spectrum at a Time Slice location.)
A. Press #1 on the keypad to access the Frequency Spectrum menu options.
B. Use the slider to select the number of the spectrum you wish to move. Press ENTER.
C. Press NO three times to get to the MOVE screen.
D. Press YES. The display will read “Move SP01 to: TS01...”.
E. Use the slider to select the number of the time slice where you want to move the
spectrum.
F. Press ENTER to execute the move.
Note: After executing a function in the Frequency Spectrum options menu, it is not
necessary to exit the menu before accessing another function. For example, you may
DRAW a spectrum, then EDIT, COPY, and MOVE it before returning to the Synth
Options menu.
2. TIME SLICE
In this menu, time slices may be drawn, edited, copied, and saved.
Note: This is exactly like creating Frequency Spectrums, except here the Spectrums are
already placed at Time Slice locations.
DRAW
a Time Slice
(Use for quick and easy creation of time slices)
A. Press #2 on the keypad to access the Time Slice menu options.
B. Use the slider to select the number of the time slice you wish to draw. Press ENTER.
SPECTRUM SYNTHESIS
Frequency Spectrum
To Next Page
Loading...