EasyManua.ls Logo

E-Mu EMAX II - Pitch Contour

E-Mu EMAX II
257 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Emax II operation manual
214
C. Press NO to get to the amplitude contour EDIT screen. Press YES to edit.
D. Use the slider to enter the amplitude of the partial at each time slice. Amplitude is
shown in percentages on the right hand side of the screen.
E. Use the cursor (<- ->) buttons to move from time slice to time slice.
F. Press ENTER , then NO twice to return to the Synth Options menu.
COPY
a partial’s Amplitude Contour
(Use for copying the amplitude contour of a partial to one or more partials)
A. Press #3 on the keypad to access the Amplitude Contour menu options.
B. Use the slider to select the number of the partial whose amplitude contour you wish
to copy. Press ENTER.
C. Press NO two times to get to the amplitude contour COPY screen.
D. Press YES to copy. The display reads “Copy AC01 to AC01...”.
E. Use the slider to select the number of the partial that you wish to copy the amplitude
contour to.
F. Press ENTER to execute the copy, then YES to make another, or NO to return to the
Synth Options menu.
Note: After executing a function in the Amplitude Contour options menu, it is not
necessary to exit the menu before accessing another function. For example, you may
DRAW an amplitude contour, then EDIT and COPY it before returning to the Synth
Options menu.
4. PITCH CONTOUR
In this menu you may draw, edit, and copy the pitch envelope of specific partials.
DRAW
a partial’s Pitch Contour
(Use for quick and easy creation of the pitch envelope of a specific partial)
A. Press #4 on the keypad to access the Pitch Contour menu options.
B. Use the slider to select the number of the partial whose pitch contour you wish to
draw.Press ENTER.
C. Press YES to start the drawing countdown. You will see the display countdown
5...4...3...2...1... When the countdown finishes, the drawing process starts.The cursor
position automatically moves from left to right - each position of the cursor denoting one
time slice. By raising and lowering the slider as the cursor moves across the screen, you
SPECTRUM SYNTHESIS
Pitch Contour

Table of Contents

Related product manuals