E-Mu EMAX II - Emax II Memory Expansion

Emax II operation manual
235
Memory Board 4 MB
2 MB Xpansion 6 MB
8 MB2 MB Xpansion
1st add
2nd add
3rd add
2 MB Emax II Total Memory
6 MB
2 MB Xpansion 8 MB
1st add
2nd add
2 MB Xpansion
4 MB Emax II Total Memory
The chart below shows the amount of sample time available with various amounts of
memory. For stereo samples, divide the time in half.
SAMPLE TIME (seconds)
RATES
1 M 2 M 3 M 4 M 5 M 6 M 7 M 8 M
20.000kHz 26.1 52,5 78.6 104.9 131.1 157.3 183.5 209.7
22.050kHz 23.7 47.6 71.3 95.1 118.9 142.7 166.4 190.2
27.778kHz * 18.9 37.7 56.6 75.5 94.4 113.2 132.1 151
31.250kHz * 16.8 33.5 50.3 67.1 83.9 100.7 117.4 134.2
39.0625kHz 13.4 26.9 40.3 53.7 67.1 80.5 94 107.4
* Sample rates shown in bold have a maximum continuous sampling time equal to that
of the 39kHz rate. Emax II performs automatic sample rate conversion on the sample,
then frees up the additional memory for subsequent sampling.
Information about the memory expansion kits is available from your local E-mu dealer.
INCREASE YOUR MEMORY
The amount of memory in your Emax II determines the bank size and thus the amount
of sample time which can reside in the unit at one time. Emax II comes standard with
either 2 or 6 Megabytes of memory, but it can be considerably expanded. Memory
expansion kits may be added to increase the bank size up to 8 Megabytes. The charts
below show how Emax II may be expanded in 2 Megabyte stages.
EMAX II MEMORY EXPANSION