Emax II operation manual
237
COMMAND TRANSMITTED RECEIVED COMMENTS
Note Off Y Y keys 21-108
Note On Y Y keys 21-108
Poly Key Pressure N N
Control Change Y Y Cntr. # 0-31
Program Change Y Y Prog. # 0-99
Channel Pressure N Y
Pitch Wheel Y Y
Sustain Footswitch Y Y Cntr. # 64
Local Control On/Off N Y
All Notes Off N Y
Omni Mode On/Off N N
Mono Mode N N
Poly Mode N N
Song Position Pointer N N
Song Select Y Y
Tune Request N N
Timing Clock Y Y
Start Sequence Y Y
Continue Sequence N N
Active Sensing N N
System Reset N N
System Exclusives Y Y Call for
Documentation
Y = implemented
N = not implemented
SuperMode is an Emax II MIDI mode designed to enhance the se-
quencer/MIDI interface. It is basically equivelent to "Poly Mode On" for
all 16 channels simultaneously.
When SuperMode is on, the Omni/Poly setting is ignored, but the MIDI
notes/wheels flag of the current preset is still checked by Emax II to
determine whether or not to accept or ignore incoming MIDI perform-
ance data.
Emax II's sequencer has 16 tracks, and each track has an independent
preset assigned to it. These presets are referred to as "Sequencer Presets".
MIDI IMPLEMENTATION CHART
To Next Page
Loading...