Emax II operation manual
55
MASTER
MASTER 1 MASTER TUNE
MASTER TUNE lets you tune the Emax II to other instruments.
1. Activate MASTER 1. The display says:
Tuning YXX Cents
Use Data Slider
... where XX is a two-digit number and Y indicates plus or minus.
2. Vary the data slider to change tuning. The display indicates, in cents, the amount sharp
(+) or flat (-) compared to the normal keyboard pitch (+45 cents to -48 cents).
Note: The tunings of individual voices can also be varied (see DYNAMIC PROCESSING
11).
3. Press ENTER to return to the module identifier, or de-activate the module to return
to Select Preset.
MASTER 2 MEMORY REMAINING
How close are you to filling up the Emax II memory with samples and presets? This
command puts a dipstick in the memory to find out.
1. Activate MASTER 2. With an empty memory bank, the display says:
Sample: 524288
Preset: 028144
The sample memory shows the number of remaining 16-bit samples and preset memory
shows the amount of remaining preset memory in 8-bit bytes.
2. Press ENTER to return to the module identifier, or de-activate the module to return
to Select Preset.
Master Tune
To Next Page
Loading...