Emax II operation manual
56
MASTER 3 VELOCITY CURVE
Emax II provides 14 different velocity curves (See Appendix) to provide different
types of dynamics in response to your playing.
The Velocity Curves do not affect incoming MIDI data and therefore this function
has no purpose on a rack mount Emax II.
1. Activate MASTER 3. The display says:
Velocity CurveXX
[01-14] / Slider
... where XX will be a number from 01 to 14. Use the data slider or the numeric keypad
to select the desired velocity curve.
2. As you play a key, the lower line will display the MIDI velocity value (with 127 being
the highest possible value). This helps you see how each velocity curve reacts to the
dynamics of your playing.
3. Press ENTER to return to the module identifier, or de-activate the module to return
to Select Preset.
Note: The velocity curve is stored as part of the preset.
MASTER 4 ERASE ALL MEMORY
This procedure clears out Emax II’s entire RAM memory— Presets, Voices,
Samples and Sequences.
Application: Provides maximum amount of memory for sampling.
1. Activate MASTER 4. The display says:
Erase All Memory
Are You Sure?Y/N
2. Press YES to erase, NO to exit without erasing.
MASTER
Velocity Curve
To Next Page
Loading...