Emax II operation manual
59
After formatting is complete, the display asks:
Format Another
Disk? Y/N
To format another disk, remove the newly formatted disk from the drive, insert the next
disk to be formatted in the drive, then press YES. Otherwise, press NO, whereupon the
display returns to the module identifier.
MASTER 6 ERASE HD BANK
This function lets you erase an entire bank from a hard disk in order to make room
for other sounds.
1. Activate MASTER 6. The display says:
Erase Disk Bank
BXX Name of Bank
...where “XX” is the bank number and “Name of Bank” is the name of the bank.
Note: The “Name of Bank” is simply the current preset at the time that the bank was
saved.
2. Select the hard disk bank that you wish to erase and press ENTER.
The display says:
Erases HD Data
Are You Sure?Y/N
3. Press YES to erase the bank or NO to return to the module identifier.
MASTER
Erase HD Bank
To Next Page
Loading...